Hi all,
I hope you can help. I need to wire up an RJ45 Patch Panel for use with a TN2224B(24port 2Wire DCP Card), before I start I just want to make sure I had the right idea.
Do I simply jumper each of the pairs of the Amphenol cable to each pin 4 and 5 on the back of the patch panel ?
eg
Blue-White / White-Blue to pin 4&5 of port 1
Orange-White / White-Orange to pin 4&6 of port 2
and so on until
Brown-purple / Purple-Brown to pin 4&5 of port 24
Any help you can provide would be most appreciated
Thanks again
Dave.
I hope you can help. I need to wire up an RJ45 Patch Panel for use with a TN2224B(24port 2Wire DCP Card), before I start I just want to make sure I had the right idea.
Do I simply jumper each of the pairs of the Amphenol cable to each pin 4 and 5 on the back of the patch panel ?
eg
Blue-White / White-Blue to pin 4&5 of port 1
Orange-White / White-Orange to pin 4&6 of port 2
and so on until
Brown-purple / Purple-Brown to pin 4&5 of port 24
Any help you can provide would be most appreciated
Thanks again
Dave.