TMU

[lacaldera]

Hello. We have a MD-110 with two LIM's. In each magazine there is one TMU. This is the card to which we can conect the music. We conect a CD, but the music don't listen when we leave a phone call waiting. Can anybody help me?

 

[kings1]

On which TMU board do you connect the MOH (Music On Hold)?
If this is in lim 1 do you have music in lim 1?

When you want MOH on both lim's than you have too made an connection between the both TMU. The best way to do this is on the MDF.

Good luck!

Kings

 

[lacaldera]

Hello. We have conected all the white-blue pair from each TMU to the same point, but it doesn't work. The signal to cenect there is special, level, impedance, etc.

Thanks

 

[MATOVTZ]

Try conect white-braun pair.

 

[FICRI]

Check the following APS-parameters

<ASPAPARNUM=154&177;
APPLICATION SYSTEM PARAMETERS
PARNUM PARVAL
154 2
177 0

Speech wires are to be connected to 4A26 and 4A28 (lower front connector) for MOH1 or 4A18 and 4A20 if you use MOH2