TMDI cable pinout to a RJ45 bisquit Jack

[dbn466]

Have an Option 11 with a new TMDI card with a cable ( part number NTBK04AA) coming out from the amphenol connector. I need to know what the pinout is to convert the db15 end to a rj45 bisquit jack. That will then be plugged into the csu/dsu.

I currently have pair 1 and 9 from the old db15 connector terminated on the green and red pairs on the bisquit jack. Then the 3 and 11 pairs of the db15 terminated to the blue and orange pairs on the bisquit jack. Does that sound correct.

Any help would be appreciated.

Thanks

 

[telebub]

You have the pin assignments correct but you may have to flip transmit and receive if it doesn't float . It should either be:

1 and 9 ----> 4 and 5 (green and red)
3 and 11 ----> 1 and 2 (blue and orange

or

1 and 9 ----> 1 and 2 (blue and orange)
3 and 11 ----> 4 and 5 (green and red)

War Eagle!
Lions Baseball '09!