Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TM 3.1 unable to retrieve stations

Status
Not open for further replies.

1Rita1

Programmer
Apr 16, 2008
97
US
I have a site with TM 3.1 SU3 that is unable to retrieve stations.

We're getting an error: Failed to Create task (at W:\om_clt\src\WebStationApps\jni\JniSchedulerManag er\JniSchedulerManager.cpp).
I see there was a bulletin from Nortel PAA-2007-0114-Global but that refers to TM 3.0 and it says it is recommended to install 300888P26 patch on TM 3.0. But I don't see anything regarding TM 3.1 Has anyone else seen this error and if so, how do I fix it?
 
There are several issues with 3.1 besides the station retrieval.
You will be unable to change the cls "dtn" or "unr"
on analog phones in some tm 3.1
I recently installed 3.1 and had my supplier contact Nortel to get me a free upgrade to 3.2
If you search Nortels DB on 3.1 there are a few issues out there.
I would suggest bumping up to 3.2.

IMO
 
At this time 3.2 is no charm either. I won't even install it in my office until after at least SU1 has been issued. 3.1 P14 was created to fix the DIG and XMWK trouble I had in 3.1 but that fix was not carried over to 3.2 until SU1 which is due out late November.
The trouble I'm seeing on this 3.1 is at a customer site and they aren't going to upgrade to 3.2 until they at least get to use their 3.1.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top