TLU77/1 Data Parameters VARC 1

[SLonge]

Hello,
I've received some really useful information from this forum in the past and I'm hoping you can all help me out again. I've got a new ISDN tie line that I'm installing into our BC8 system. I'm having a problem with VARC however, the system keeps telling me that the value I'm using is invalid. I think it should be H'0001110, but the system won't accept it. Any help would be greatly appreciated.

ROU TYPE VARC VARI VARO FILTER
xx SL63 ?? H'00000002 H'0000027 NO

Thanks,
Steve

 

[SYAR2003]

Tie line ISDN/QSIG should be used with TL block SL60.
Try :
/* A-Side */
TYPE=SL60,VARC=00000310,VARI=15440000,VARO=06300000;
/* B-Side */
TYPE=SL60,VARC=00000310,VARI=15480000,VARO=06000000;

SERV=1010030000,SIG=111110000031

 

[SYAR2003]

If TLU77/1 is used TL block must be SL63:
Sorry previous post is for TLU76/1 32 channels.

TLU77/1 with SL63:


Tie Line Tlu77/1:
VARI=00000000 (tie line)
VARI=00000002 (trunk line national isdn)
VARO=00000027

Try VARC=00001110 (in your post you missed a zero)

Other side make changes for D7 in varo .

 

[SLonge]

Thanks a million! I really appreciate all the help on this forum!