Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TLU75/1 and UK central office trunk

Status
Not open for further replies.

kkong42

Technical User
May 19, 2003
13
GB
Hi there,

Does anyone have know the parameters to use with the TLU75/1 and a standard UK 2-wire analogue trunk line.

I tried some parameters but without success... previously we used the TLU74 card and function block TL1, but TLU75 can't use TL1, only TL11 and TL25 for PSTN lines.

I am using MX-ONE TSW SP3.

Thanks a lot,
kong
 
Which Standard ( UK 2-wire analogue trunk line ) would that be ?
 
Hi

It's just your standard "central office" trunk, e.g. the dialtone as provided by BT to your house or an analogue extension port from another interworking PABX.

An FXS circuit, what you would connect a standard telephone to.

Regards,
kong.
 
With Type=TL25, for Regular (non-DDI) PSTN use
VARC=00000010,
VARI=00000000,
VARO=00001071 PTS
or 0000C071 PSP
 
Thanks, tried that, but as soon as I assign an individual to the route (ROEQI:ROU=3,TRU=2-1,EQU=002-2-10-1), I get one of the same error messages as I had before.

The TLU75 is the only traffic board in LIM2, MAG2.

Code:
<ALLOP;
ALARM LOG

IDENTITY: XXXXXXXX
VERSION: CXP1010125/4/TSWSP03/R4A

DATE: 11SEP07   TIME: 21:16:06

CLASS: 4

12  NO CONNECTION WITH DEVICE BOARDS IN ONE MAGAZINE
DATE     TIME      ALP  NOIF  EQU          INF1 
11SEP07  21:03:47  4    1     002-0-**-**  2    


CLASS: 2

15  DEVICE BOARD FAULTY OR MISSING
DATE     TIME      ALP  NOIF  EQU          BRDID
11SEP07  21:03:41  3    1     002-2-10-00  76   

LAST ALREI: 11SEP07, 11:38:47

END


<RODAP:ROU=3;
ROUTE DATA
ROU   TYPE  VARC        VARI        VARO        FILTER
3     TL25  H'00000010  H'00000000  H'00001071  NO
END

<ROCAP:ROU=3;
ROUTE CATEGORY DATA
ROU SEL              TRM SERV       NODG DIST DISL TRAF     SIG          BCAP
3   0110000000000010 4   3100100100  0   30   10   00151515 400110000000 001100
END

<ROEDP:ROU=3,TRU=ALL;
ROUTE EQUIPMENT DATA
ROU   TRU      EQU           IP ADDRESS         SQU       INDDAT           CNTRL
3     002-1    002-2-10-01
END
 
That usually means a Faulty Card.
How did you ever get the Card initiated ?
CNHUI or CNBOI ?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top