Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TLU 75
- Thread starter Pabxer
- Start date
Hi
TLU75 is an analog jonctor line.
To connect 2 MD, you go from TLU75 to ELU29
The siganlling is simple:
from TLU75, offhook make current feed appear.
The called party is sent over the TLU75 either in DTMF or decimal.
From ELU29 when calling the extension, ringing voltage is send. TLU75 goes offhook, but you must have a hotline to operator to dispatch the call.
If you want DID tie line, you must use TLU80 instead.
TLU75 is an analog jonctor line.
To connect 2 MD, you go from TLU75 to ELU29
The siganlling is simple:
from TLU75, offhook make current feed appear.
The called party is sent over the TLU75 either in DTMF or decimal.
From ELU29 when calling the extension, ringing voltage is send. TLU75 goes offhook, but you must have a hotline to operator to dispatch the call.
If you want DID tie line, you must use TLU80 instead.
- Status
Similar threads
- Locked
- Question
