tiu

[ozgur74]

hello
it's very important for me to connect an ctt11k in my md .
i think i need a tiu and i have it .
But i don't have any document for connecting and how to declare it .
Is someone can help me ?
any document for tiu or ctt11 and connection ?
thanks a lot .
Mary christmas and happy new year for all

 

[Isinor]

Hi Ozgur74,

Are you using MD110 Trading Application..? if so then you need to get software, cables and a power supply for the TIU. Then…

TIU – Load Software
1) Connect the appropriate cable from the COM-1 port (or COM-2 if this is specified in the TIUPROG.BAT file) of a PC to the TIU 56xx.

2) Set DIP switch 1 in boot mode (ON) and reset the TIU 56xx. (Remove side cover of TIU)

3) Start the program by typing tiuprog from the directory where all the TIU files (listed in section TIU files overview) reside. The batch file tiuprog.bat is then executed.

TIU Cables Line, Tape & Power…
The TIU connects to the MD110 as a digital extension using 1 or 2 pairs. It also has an optional analogue output for tape recording. It also requires power PSU-16 (AC-DC) or PSU-17 (DC-DC). To access MD110 line, tape & power termination the remove the side cover.

TUI Other Cables
Most of the other cables (1 or 2 Handsets, Optional Microphone, Optional Speakers 1 or 2) connect to the CDU’s which are connected to the 2 TIU audio jacks.

TIU to CTT11
This is the easy bit RS422 from the TIU to the CTT11. The CTT11 also requires power I think (I only ever worked with CTT10’s)


MD110 Programming
Optionally (Only required for 4 voice channels) The ELU28 requires 32 TimeSlots Donot CNHUI it..!
CNBOI:BPOS=1-1-20,BRDID=77,NUMIND=32;

EXCCS:CAT=11,TRAF=01151515,SERV=02001200,CDIV=011150000;
Some of the SERV bits and

DKEXIIR=54000,EQU=1-0-20-03,MON1=1-0-20-04,SPE2=1-0-20-19,MON2=1-0-20-20,CAT=11,SIZE=11,ATTR=11;
DKEDPIR=ALL;

The Functions keys 5 and 6 have special usage – Log on and Password.
DKFKIIR=54000,KEY=6,FCN=NSK,ID=54000,ABN=0;
DKFKIIR=54000,KEY=5,FCN=NSK,ID=1234,ABN=0;
DKFKP;

Other function keys if required…
KEY FCN
4 Call Back CAB
5 Password
6 Identity ID
7 Parking PRK
8 Redial RDL
9 Right Handset HED2
10 Right Monitor MON2
11 Left Monitor SPE1
12 Transfer TRF
13 Monitor to Right Handset SPE2
14 Left Handset HED1
15 Monitor to Left Handset MON1
16 Diversion DIV
17 Conference CONF
18 Broadcast Select BCTS
21 Volume Adjustment VOLA
22 Volume Increment VOLI
23 Volume Decrement VOLD
24 Broadcast Activate BCTA
26 Post Dialling digits SUF
29 Free on second line ODN2

Then you might want to add some Direct Access Keys…

DAD – Both way working lines
DKDAIIR=54000,KEY=41,ADN=54001,CAT=15,BNUM=715000,ID=TEAM,ATTR=10;
DKKDPIR=54000;

DAO – Out going only line
DKDAIIR=54000,KEY=42,BNUM=775001,ID=MAD,ATTR=10;
DKKDPIR=54000;

DAG – Group Keys
DKDAIIR=54000,KEY=43,ADN=54002,CAT=15,ID=BAD,ATTR=10;
DKKDPIR=54000;
DKMKIIR=55000,KEY=43,MDN=54002;
DKKDPIR=54000&55000,KEY=ALL;

You can also assign names to received B Numbers…
DKNIS:BNUM=1001,ID=Group 1;
DKNIP:BNUM=ALL;

Or have Mutiple lines (MDN’s)
DKMKIIR=51000,KEY=29,MDN=52003;
DKMKP:=ALL;

Well that’s a 2 or 3 day course normally…
Hope it helps a bit…




Regards
Isinor

 

[ozgur74]

Thanks a lot for your response .
I am using md110 bc11, have you reference for cables and software to connect pc and power supply?

Regards
ozgur

 

[mundus]

Hi' you can't use TIU in BC 11, the latest release for this is BC 10 and here you must have the TA sw.

 

[ozgur74]

OK
I CAN HAVE AN BC10
WHAT IS TA sw ?

 

[whosrdaddy]

trading application is a special version of MD110. it contains additional units regarding the DK commands and the interfacing towards the panels. this is official software and must be bought from a local provider (don't forget licences too)

--------------------------------------
What You See Is What You Get

 

[ozgur74]

In fact i need to test the fonctions of key panel.
I resume : I need md110 in bc10 whith trading application , TIU whith an external power supply , cables to connect PC and software for TIU ?
I connect ctt11 on rs422 of TIU , and TIU on ELU28 .
Is it correct ?
If yes , does someone have ericsson refereces of all cables and softwares ?
Best regards

 

[ozgur74]

Is md traffic is same with md110 in bc10 whith trading application ?

 

[whosrdaddy]

what dou you mean with "md traffic"??

if you're referring to traffic capacity, the answer would be yes...

--------------------------------------
What You See Is What You Get

 

[ozgur74]

I don't know , it's an md 110 which can do accounting ...
Is it ?

 

[ozgur74]

Do you have the ericsson article code for ta sw ?
Because nobody know it, i don't find it .
Thanks a lot

 

[whosrdaddy]

I think it's no longer supported by E/// (phased out)

anyway, software is normal bc10 with additional units loaded. I think SW has product code FAS 102 54.

excerpt from alex :
[tt]
Verify with command LIDAP that the ASB 501 04 system has valid licences for:

Number of Dealer Key system Extensions (CTT-EXTENSION in the printout) for Trading Application, FAL 104 457 MD control extension RTU 1 position.

Number of Radio Key Extensions (RADIO-EXTENSION in the printout) for Control Application, FAL 104 0285 MD radio extension RTU 1 position.

TLU71 (EXTERNAL-LINE-CAS-ANA in the printout), FAL 104 461 MD analogue external line RTU 1 port.

Both 1 and 2 are needed for Control Application but only 1 is necessary for Trading Application. Number 3 is only necessary when TLU71 is used.

If licences are missing or need to be upgraded, contact the purchase office where the
ASB 501 04 system was bought. When a new licence file is received see operational directions for LICENCE SERVER, LI.

--------------------------------------------------------------------------------
Table 6-1 Trading Application units UNIT NAME 1 LIM SYSTEM 2 LIM SYSTEM >2 LIM SYSTEM
BDMP LIM1 BOTH LIMs ALL LIMs
DKHHS1 LIM1 LIM1 LIM1
DKHHS2 LIM1 LIM1 LIM1
DKHHS3 LIM1 LIM1 LIM1
DKHHS4 LIM1 LIM1 LIM1
DKP1A LIM1 BOTH LIMs ALL LIMs
DKP1D LIM1 BOTH LIMs ALL LIMs
DKP1I LIM1 BOTH LIMs ALL LIMs
DKP1K LIM1 BOTH LIMs ALL LIMs
DKP1M LIM1 BOTH LIMs ALL LIMs
DKP1N LIM1 BOTH LIMs ALL LIMs
DKP1T LIM1 BOTH LIMs ALL LIMs
MCMP LIM1 BOTH LIMs ALL LIMs
SCBP1 LIM1 BOTH LIMs ALL LIMs
UDCP LIM1 BOTH LIMs LIM2&3
USDPS1 LIM1 BOTH LIMs ALL LIMs
USDPS2 LIM1 BOTH LIMs ALL LIMs
VMCP LIM1 BOTH LIMs ALL LIMs

--------------------------------------------------------------------------------
Table 6-2 Control Application units UNIT NAME 1 LIM SYSTEM 2 LIM SYSTEM >2 LIM SYSTEM
CXMRS1 LIM1 BOTH LIMs ALL LIMs
CXMRS2 LIM1 BOTH LIMs ALL LIMs
DINR LIM1 BOTH LIMs ALL LIMs
DRAM LIM1 LIM2 LIM2&LIM3
DRAR LIM1 BOTH LIMs ALL LIMs
DRER LIM1 BOTH LIMs ALL LIMs
RKHH1 LIM1 LIM1 LIM1
RKHH2 LIM1 LIM1 LIM1
RKPS1 LIM1 BOTH LIMs ALL LIMs
RKPS2 LIM1 BOTH LIMs ALL LIMs
RKPS3 LIM1 BOTH LIMs ALL LIMs
RKPS4 LIM1 BOTH LIMs ALL LIMs
RKPS5 LIM1 BOTH LIMs ALL LIMs
RKPS6 LIM1 BOTH LIMs ALL LIMs
RKPS7 LIM1 BOTH LIMs ALL LIMs
RLHH1 LIM1 LIM1 LIM1
RLHH2 LIM1 LIM1 LIM1
RLRS1 LIM1 BOTH LIMs ALL LIMs
RLRS2 LIM1 BOTH LIMs ALL LIMs
RLRS3 LIM1 BOTH LIMs ALL LIMs
RLRS4 LIM1 BOTH LIMs ALL LIMs
RLRS5 LIM1 BOTH LIMs ALL LIMs
RLRS6 LIM1 BOTH LIMs ALL LIMs
RLRS7 LIM1 BOTH LIMs ALL LIMs
RLRS8 LIM1 BOTH LIMs ALL LIMs
RSMHH1 LIM1 LIM1 LIM1
RSMHH2 LIM1 LIM1 LIM1
RVMPS1 LIM1 BOTH LIMs ALL LIMs
RVMPS2 LIM1 BOTH LIMs ALL LIMs
RWDB LIM1 LIM1 LIM1
RXMP LIM1 BOTH LIMs ALL LIMs
SCRP1 LIM1 BOTH LIMs ALL LIMs
TXMPS1 LIM1 BOTH LIMs ALL LIMs
TXMPS2 LIM1 BOTH LIMs ALL LIMs
VRP LIM1 BOTH LIMs ALL LIMs

[/tt]

--------------------------------------
What You See Is What You Get

 

[ozgur74]

I have one reference , but i don't know
it is : LZY 203 5093

DO you know ?