Timing on trunk

[Chukwuemeka]

How can I cut off users on outgoing Trunk lines after some minutes- say Ten minute (10 Min.)

 

[rfpui]

It is not possible
I never heard abut this in MD 110 and other telephony sytem

But if You have BC 12 You can use charging facility for limited call duration/limited cost

 

[CPKC]

Is it analogue trunks?

 

[Chukwuemeka]

1) It exists in MD110 its like a patch.

2) Yes it is on analogue trunk.

 

[CPKC]

You can try this:

If you don't have polarity reversal on trunks from pstn,set SIG D4=1
ASPACARNUM=41,PARVAL=600;(600s=10 min)
This is work on BC11SP12 AS standard.
Good luck