TimeSync

[kenwad]

I have 5 Netware servers and 4 NT servers at multiple locations. We are running eDirectory 8.5 Only the NT servers are showing in sync.

4 Netware servers are shown as secondary
1 Netware server is shown as reference

Everything I've read says that the config should be Primary... The rest secondary. Does NE1 have this type of setup?

 

[spi200]

Hi

The reference server is a primary with a higher weighting (16) so things will synch better, so point your secondary's to the reference server and reload timesync nlm - with in a minute the server should come in synch.
There are some good TID's in the Novell support web site.

Good luck

David CNE