Timer for Internal calls 1

[md110user]

Hi
Is there any way to put a timer to cut off a call after specific time. What I need as follows:

There is an Extension calls another Extension on the same pbx “MD110” for more than three hours, I need to put a timer to Enable the pbx that after specific time the Internal calls should be cutting off, so any extension on the Pbx connected to another extension on the same pbx or to a trunk line “outgoing or incoming calls” after specific time should be cutting off. By the way this feature exist by default on the Panasonic PBXs.
Best regards

 

[SYAR2003]

That's not possible ,but in BC12 some other feature
is availible . MCOST ,Maximum charging cost .
MCOST parameter is stated with KSEXI/EXTEI and
will cut a call when the stated charging units are reached.
The parameter states the maximum charging cost associated with an extension. Maximum cost is in terms of pulses and therefore the call duration is limited by the assigned number of pulses.

 

[SYAR2003]

So for internal call this will not be availible .
But can be utilized for external call when charging is supported on the trunks .

 

[apacheMD]

Hei

You can use Applink and write a code for a disconnection for the xtensions you will monitor.

cheers

apache