Is it possible to specify which errors get a time stamp from the switch. As an example, ERR4019 errors get a time stamp when they occur while other types of errors/messages do not. I'm looking for the load where I would tell the switch which errors I want time stamped and which ones I don't. My 61C is on rls 21.54
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Time Stamps
- Thread starter freddog
- Start date
acewarlock
Technical User
Time stamps are output every 15 min
- Thread starter
- #3
Here's an example of what I'm looking for... The first 3 lines show the normal time stamp plus AUD and DTC messages that are spit out regularly during the day. The lines that follow that are time stamps showing the actual time that the ERR4019s occured. I'm looking for the LD where you specify that you want or do not want a time stamp for ERR4019s and so forth.
TIM091 06:00 23/12/2002 CPU 1
AUD000
DTC001
.
.
.
ERR4019 1234
TIM091 06:44 23/12/2002 CPU 1
ERR4019 5678
TIM091 06:59 23/12/2002 CPU 1
TIM091 06:00 23/12/2002 CPU 1
AUD000
DTC001
.
.
.
ERR4019 1234
TIM091 06:44 23/12/2002 CPU 1
ERR4019 5678
TIM091 06:59 23/12/2002 CPU 1
- Status
Similar threads
- Locked
- Question
- Locked
- Question