Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Time stamp out on Call Pilot 2.01.27

Status
Not open for further replies.

Malley63

Technical User
Jun 16, 2005
91
AU
We have a call Pilot 2.01.27 and the time stamp is out by an hour. Has any one seen this?
 
It has to do with daylight savings time. Unfortunately to keep it from happening every year you have to upgrade to a newer release. This is one of many tricks to get it corrected until next year.
1. Check the PBX in LD 2 and ensure time is correct.
2. Ensure 'Automatically adjust for Daylight Savings Time' check box is checked on CallPilot server.
3. If CallPilot server time does not match, set it to match.
4. Change the Time Zone to another Time Zone. (e.g. MST) Time should again be off. Change the time to match the
PBX again.
5. Set the Time Zone back to the correct Time Zone (e.g. CST). Time should again be off. Change the time to match
again.
6. Stop and restart the CallPilot Time Service in Services.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top