Time on switch

[amitde]

Hi,

Time on 11c rls 3 is gaining clock. I wanted to know the time adjustment feature in ld 2. Wanted to know the usage along with the idle parameters[adjustment 1-60 seconds] for printing and setting it. Also would lamp audit help in this regard?

Thanks,
Amit De

 

[johnpoole]

are the clocks al on the same time? if not it's the lamp audit, known problem with rls 3. after i started my lamp audit time was clean for over a year, then the audit stuck and clocks started drifting again.. took 3 days for nortel to find the problem.. ld 77 and start the lamp audit.. when mine got stuck i had to do and ini after nortel reset some pointers.. ld 2 time adjust works only if a stad will adjust all the clocks

john poole
bellsouth business
columbia,sc

 

[amitde]

Didn't actually get your point. Its affecting the entire site, I mean the display on all the phoneset shows wrong time. Well I logged into the switch and did ttad and found clock 4 mins ahead, then I did stad to set the exact time. Also, I logged into ld 77 and did DLMP 0.

Thanks,
AD

 

[acewarlock]

If your not running a lamp audit in your MID's the clocks in each phone can drift off the correct time even if the system time is correct.

 

[amitde]

Is this wht you are talkin about.....

OVLY
SID 0
BKGD 044
PBXH 01
TODR 01
DROL 034 037 038 043 044 060 135 137 <------ MID's ????
MULTI_USER ON

Thanks,
AD