Time of day routing

[jeter]

Here is the problem... Time of day routing seems to working okay but the calls are not always forwarding out okay to the answering service... Some times it works other times we get a call can not be completed as dialed or fast busy.. I debug the gateway (debug isdn q931). I see the call come in, it gets translated within call manager then I see it trying to dail out.. We have two Pri's running MGCP with two D Channels... The cause code was 0x809e which I believe is indicating far in trouble.. Any thoughts?



Daily Thought:Some people are like slinkies. Not really good for anything but they bring a smile to your face when
pushed down the stairs.


Tek-TIP Member 19,650

 

[jeter]

*********************Resolution*****************************

The problem here was an ILEC issue... After a week of testing we found that any number we forwarded to in the local area exchange worked okay...

Anything going out a trunk to a CLEC or PCS failed becuase we were receiving a
disconnect signal from the central office..

The signally between the end devices did not match acknowledgements...

We had to set up call handlers in unity and force a transfer... This all worked very well... Thanks to several motivated individuals in our group and our tech support...

So if you ever have this issue within your area this is a quick fix................................................

Daily Thought: Some people are like slinkies. Not really good for anything but they bring a smile to your face when
pushed down the stairs.


Tek-TIP Member 19,650