Time & Date with CCM 6.0

[bigchiefdan]

Started about 20 minutes ago.
Looked at phone and had wrong time, off by 1 hour.
Adjusted the time. Clicked save. it rolled the date back to December 29 2008.
Have tried several times to cahnge the date. The closest I can get to today is 2/01/2009.
This is causing issues with my call center also.

Any ideas?
I have waited several minutes between changes to allow time for it to do any saving process. This is to no avail.

 

[jeter]

where did you change the time and date?

To be sure make sure it is done via CLI on the server...

I think is is under system utilities....



Go Army!
Tek-TIP Member 19,650

 

[pndscm]

While you're at the CLI set up an NTP server.

 

[Riktov]

Do you have a DST?

First check on the Date/Time group if you have CMLocal or any other and the Time Zone if those options are correct.
The go to the OS ADmin page and check the Date and Time. you can also check at the CLI with the show status command.

If the date or time is wrong change from there.




Caos is the natural order of things...

 

[bigchiefdan]

Thanks for the info. After waiting a day, I was able to correctly change the date.
Any time the system crashes (bout once every 3 days) it either reverts to an old date or the time is an hour off.

I assume all issues will subside once I get my upgrade completed, which has failed twice now.
Thanks,
Dan