I'm trying to get a Timberwolf 9730 working with a Sun V880 system. The hardware is recognized in Open Boot when I do a probe-scsi-all: one STK 9730 and two Quantum DLT7000 drives.
Doing a boot -r doesn't created the expected devices at /dev/st or /dev/sg. My research tells me I need the exact parameters added to [red]/kernel/drv/st.conf[/red] for this to work. I found a sample config in a QFS install guide for an STK 9840, and adapted it to my st.conf ...
tape-config-list =
"STK 9730", "STK 9730 TimberWolf", "CLASS_9730",
"QUANTUM DLT7000", "DLT 7000 tape drive", "dlt7-tape";
CLASS_9730 = 1,0x36,0,0x1d679,1,0x00,0;
dlt7-tape = 1,0x36,0,0xd679,4,0x82,0x83,0x84,0x85,3;
... but still no happiness. Any advice would be appreciated.
Thanks!
Doing a boot -r doesn't created the expected devices at /dev/st or /dev/sg. My research tells me I need the exact parameters added to [red]/kernel/drv/st.conf[/red] for this to work. I found a sample config in a QFS install guide for an STK 9840, and adapted it to my st.conf ...
tape-config-list =
"STK 9730", "STK 9730 TimberWolf", "CLASS_9730",
"QUANTUM DLT7000", "DLT 7000 tape drive", "dlt7-tape";
CLASS_9730 = 1,0x36,0,0x1d679,1,0x00,0;
dlt7-tape = 1,0x36,0,0xd679,4,0x82,0x83,0x84,0x85,3;
... but still no happiness. Any advice would be appreciated.
Thanks!