tie 2 switches together. 1

[myarberry]

I have an option 11 in one room and a option 61 in another room and need to know how to tie them together. I really need the physical connection between the two.

Thanks Mike Yarberry

 

[worldwidedialtone]

Easy way is a couple of analog ports on both fed to trunk card on the other with simple acces codes or other simple ways to access/dial/answer. Or get digital trunk cards and and set up a TIE trunk route

MIKE

 

[myarberry]

I have tie trunks and routes built, I think what i am missing is there something that needs to be between the 2 switches such as copper I know we can't use fiber on the 61.

 

[EddieDuece]

I'm pretty sure you can run copper between them and configure a psuedo T1 connection.

 

[johnpoole]

you can use a simple patch cord and connect it to pri's in each switch.. all you need if your going to build a pri between two switchis two pair... on the rj-45 pins 1,2 4,5.. on a dn 9 pins 1,3 9-11.. they need to be rolled, ie on one end use 1,2 4,5 so the far end will have to be 4,5 1,2.. you do not need csu's for that ckt..

john poole
bellsouth business
columbia,sc