Tie 2 BCM50 R2 together.

[PHXAZ]

Hello all
I have a client that has 2 BCM50 in the same office for 2 companies,sometimes they needed to call each other or transfer calls across, I tied both using the 4 analog trunks and analog ports. all has been working ok but they now want to be able to receive caller id info form one to the other.
I know that I can use IP trunks for these my question is do I need to also have the MCDN keycodes, all they want is to receive caller id and nothing else.


"Friends,Romans,Countrymen lend me your ears I come to ask for help and to give it, lets not argue on who is best or worst lets just help each other

 

[Firebird Scrambler]

I have a BCM 50 as my test system on release two with two analogue trunks and caller line ID works fine. The problem I think you might have is when you do blind transfers over to the other site. I don't think the original caller line ID will be shown, but you might only see the ID from the other BCM 50 site?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[cook1082]

If station to station calling yes for IP trunks and MCDN to pass the extension and location CLID. Plus you need to build target lines on both sides,and routing.