Hi Guys
Iam using the following configuration
San environment:
1. File and Print server
2. Two Exchange servers in cluster (Active and Passive)
3. Backup server
4. Dell Power vault Tape Library 132 T
SAN switch McData 4400 (Sphereon) (This is there in the compatibility matrix) to which 5 devices connected ( Shared Storage on which the Exchange database exist, SAN switch -2,Exchange server - 2 on cluster one Passive and One active, File and Print Server, Backup server)
HBA Card : QLogic Firmware
Backups and restore have No problems but just the throughput is toooooooo low .I get the sane throughput if
all the servers are on the SAN and if i backup that server
which is locally attached to the server.I get 1gb/min for both situations
Any ideas and any settings which can be checked and can be implemented to increase the performance
thanks in advance
Iam using the following configuration
San environment:
1. File and Print server
2. Two Exchange servers in cluster (Active and Passive)
3. Backup server
4. Dell Power vault Tape Library 132 T
SAN switch McData 4400 (Sphereon) (This is there in the compatibility matrix) to which 5 devices connected ( Shared Storage on which the Exchange database exist, SAN switch -2,Exchange server - 2 on cluster one Passive and One active, File and Print Server, Backup server)
HBA Card : QLogic Firmware
Backups and restore have No problems but just the throughput is toooooooo low .I get the sane throughput if
all the servers are on the SAN and if i backup that server
which is locally attached to the server.I get 1gb/min for both situations
Any ideas and any settings which can be checked and can be implemented to increase the performance
thanks in advance