Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

thread955-1014241

Status
Not open for further replies.
evilcb

evilcb

IS-IT--Management
Dec 5, 2002
12
GB
I'm in the same SBS Exchange 2003 boat as Mclarry76!!! but how do you enable port 25?
I have two NIC's Private and Public (connects to a router to get to the web).
Used EIC Wizard to configure
Send Internal=OK; send External=OK
Recv Internal=OK; recv External=NOTHING!!!
Tested SMTP using telnet (port 25)=OK
Firewall disabled on both NICs
NAT enabled on Public NIC

However,when I re-establish existing SBS2000 Exchange =OK

Setting checked against SBS2000.

The main difference is the Firewall , but as it is disabled.......................

Can anyone give me a glimmer of hope?


 
Status
Not open for further replies.

Similar threads

Garytek
  • Locked
  • Question
thread955-752607 ("Error resolving username when setting users up")
Replies
0
Views
11
Garytek
Garytek

Part and Inventory Search

Sponsor

Back
Top