Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

thread936-1798367. Does the same co

Status
Not open for further replies.

zodiacgam

Technical User
Jun 23, 2009
110
GM
thread936-1798367. Does the same configure applies when two Panasonic TES824
are to be connected at the same location to be able to intercom across extensions
 
The Panasonic KX-TES824 has a max of 8 CO Lines & 24 Analog extensions.
If you would like to have these two systems hooked-up together, you will need to have some free CO Lines ports and free Analog extensions ports on either system. E.G Systems KX-TES824-A & KX-TES824-B, you will pick 4 Analog extensions from KX-TES824-A and plug them into the CO Lines ports of -X-TES824-B and vice-versa. This assumes they are in the same physical location. The rest is programming where u will need to group the trunks and setup routing accordingly.

If they are in different geographic locations, the programming will be the same but you will need a 4FXS+4FXO gateway at each location, if need be, u can add a mini SIP server and have some IP Phones on the same INTERCOM as well and all will be able to call each other. Be mindful of the extension ranges. 1XX, 2XX, 3XX etc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top