Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

thread798-1286048 OPT11c/single SS

Status
Not open for further replies.

PDTuser

Vendor
Jun 17, 2011
14
0
0
US
thread798-1286048
OPT11c/single SSC card running for long periods of time fill up RW (real word) machine buffers. Cannot EDD cannot run when this happens. Must Sysload to reset Memory words space. Dual CPU systems do this when they switch during MID routine. This is known issue on THOR systems.
 
That's an old thread and I'm on it from way back in 2006!.

I think it's best to provide more information.

Software version,
Patching level,

Current U and P values / Disk Recs available. Such as this below in LD 10 / 11.

>LD 10
PBX000
MEM AVAIL: (U/P): 836341 USED U P: 454210 85704 TOT: 1376255
DISK RECS AVAIL: 426

Have you done the LD 1 overlay to see if you can free up some data?.

Also print off the DAT data in LD 43.


Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
my post was to point out that OPT11c/SSC machines need to be SYSloaded when EDD issue described rares it's head. Known issue related to Z: drive of SW daughterboard. It happens often on machines that are very stable and power has been able to keep system running for long periods of time.
trouble can also be cleared via FBUG commands (cntrl-B during boot)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top