RES3700GUY
IS-IT--Management
thread693-1789397
Sorry the ELO drivers doesn't cover win CE 5.0 (which is the default win version loaded on the DT166).
In an old drive Ive found some files and directions that read:
Step 1. Obtain the EloUsbTouch.zip file from the MICROS web site.
Step 2. Copy the contents of this zip file onto the RDC at location: \fs\EloUsbTouch. Note You will have to create the \EloUsbTouch folder if it is missing.
Step 3. Open the command window and run the command sequence below:
\FS\EloUsbTouch\RegUtility.exe /RESTORE \FS\EloUsbTouch\EloReg.txt /KEEP
Step 4. Reboot
Ive tried these directions and the KDS DT166 still doesn't recognize the touchscreen.
Any takers?
Sorry the ELO drivers doesn't cover win CE 5.0 (which is the default win version loaded on the DT166).
In an old drive Ive found some files and directions that read:
Step 1. Obtain the EloUsbTouch.zip file from the MICROS web site.
Step 2. Copy the contents of this zip file onto the RDC at location: \fs\EloUsbTouch. Note You will have to create the \EloUsbTouch folder if it is missing.
Step 3. Open the command window and run the command sequence below:
\FS\EloUsbTouch\RegUtility.exe /RESTORE \FS\EloUsbTouch\EloReg.txt /KEEP
Step 4. Reboot
Ive tried these directions and the KDS DT166 still doesn't recognize the touchscreen.
Any takers?