The request could not be performed because of an I/O device error.

[r3gtwrjht5wynfc]

I have a BU Exec job that keeps failing. I have posted the errors from event viewer.This seems to point to a hardware problem of some type. Is anyone familiar with these errors.
If I had to guess I would say it is a controller problem.
I appreciate any feedback. Thanks



A parity error was detected on \Device\Scsi\cpq32fs21. event id 5

An error was detected on device \Device\Harddisk0\DR0 during a paging operation. event id 51

SCSI Tape Drive Head Needs Cleaning.

The tape drive with SCSI target 6 connected to SCSI bus 1 of the controller in slot 3 needs to have a cleaning tape inserted and run.

[SNMP TRAP: 5008 in CPQSCSI.MIB] event id 1119



Storage device "COMPAQ 1" reported an error on a request to write data to media.

Error reported:

The request could not be performed because of an I/O device error.

event id 57665

 

[SQLBill]

Did you clean the tape drive as it requested?

-SQLBill

 

[dogmata]

Take the device of SCSI ID 6, you should avoid ID's 6,0, or 1. > check the system logs for event id 7,9,11 or 15's > these are SCSI timeouts >> check your hardware.

Dog