Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

The MAC Bridge Miniport Service failed to start

Status
Not open for further replies.

ilceres

Technical User
Nov 2, 2005
88
IT
Hi to all

Here the issue: when I reboot a Windows 2003 Server with no MAC Bridge Installed I get the
following error message...

"The MAC Bridge Miniport Service failed to start due to the following error:
the system could not find the file specified."

the service does not appear in the services applet so I can disable it.
Where do I disable this service to prevent it from trying to start?

Thanks in advance

Cerutti Mauro
 
To resolve, Try this:

1.Start Registry Editor (regedit)
2.Locate:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BridgeMP
3.Change the value of the "Group" registry entry to an empty string (delete the default value) "PNP_TDI", and then click "OK"
4.Quit Registry Editor.

Also, Perform steps above on:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet002\Services\BridgeMP (if exists there)

Please see Microsoft Knowledge Base (KB ID: 833375) for similar/related solution.

Note: May have to reverse the process if you enable Routing and Remote Access Service.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top