The configuration I am trying to accomplish is to have dual nic's in a Computer and then attach two Routers back to back. I am unclear if you can really configure the two NIC's to be active. In other words the primary NIC (External/Wan)and the Seconday NIC internal for the Lan for the back to back 2501 routers. The external NIC/Wan is used for my DSL 675 Cisco Router and the the secondary NIC/Lan internal is used for a lab with one Windows NT 4.0 Workstation 4.0 SP6a with two NIC's.
I have copied the previous configurations you have listed for the back to back 2501 setup and am trying to figure out whether I need to setup two subnets within Windows NT 4.0 route list and what would those IP addresses and subnets be for the configuration you have written below:
Please, refer to the previous Thread from 12/19/00 titled
How do you set up a lab with one PC & 2 Cisco 2501 Routers (Follow Up).
Thank You
Robert
I have copied the previous configurations you have listed for the back to back 2501 setup and am trying to figure out whether I need to setup two subnets within Windows NT 4.0 route list and what would those IP addresses and subnets be for the configuration you have written below:
Please, refer to the previous Thread from 12/19/00 titled
How do you set up a lab with one PC & 2 Cisco 2501 Routers (Follow Up).
Thank You
Robert
