Thanks yizhar, more one question

[Oh]

Hi,everybody
Thanks yizhar. He gave me a big help.
a new question:
I config a PIX can access by Cisco VPN client 3.5, and save the config file to a tftp server. Then i delete something and add something in the configuration. finally I decide to use the config file stored in tftp server. I use "conf net xxx.xxx.xxx.xxx:configfilename", the pix told me config wrong. so I used "clear" and "no" command to delete almost all things in running config, then run "conf net" again, it shows config ok. After do these,the VPN client sometime can built VPN tunnel and pass the radius auth, but ping the other side is not reach.
My question is how can I make a mini or beginning config without using "no" and "clear" command? Why this unstable situation happens?

thanks

 

[yizhar]

HI.

I guess the following link will help you:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/c.htm#xtocid6

So you can try to issue "clear config" command prior to import from tftp.

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar