Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TFTP issues on 2650 and 5300

Status
Not open for further replies.
testbench

testbench

Vendor
Sep 6, 2004
64
GB
Hello,

I am using 2650 and 5300 connected via tagged links carrying the correct VLANs, the 5300 is routing between vlan 10 on the 2650 and VLAN 99 on the 5300.

I have a phone system on VLAN 99 and a user P.C running a Phone application on VLAN 10.

The application on the P.C uses TFTP to talk to the phone system on VLAN 10.

I have no access lists applied to any VLAN's, I can ping between VLAN 10 and VLAN 99. But as soon as I try to TFTP across VLAN layer 3 interface nuffink works.

HP support have no answer.
 
Status
Not open for further replies.

Similar threads

harveystephenb
  • Locked
  • Question
HP 2650 Wireshark Issue
Replies
0
Views
144
harveystephenb
harveystephenb
AH64Armament
  • Locked
  • Question
Testing and Acceptance
Replies
0
Views
142
AH64Armament
AH64Armament
Siopao
  • Locked
  • Question
Watchguard XTM, HP 2920 PoE, and Cisco SG300-20
Replies
0
Views
142
Siopao
Siopao
DanielUK
  • Locked
  • Question
HP Procurve 2650 and wireshark
Replies
7
Views
217
VinceWhirlwind
VinceWhirlwind
Wadoki
  • Locked
  • Question
What is the command to enable 3rd party SFP+ transceivers on HP switch?
Replies
0
Views
206
Wadoki
Wadoki

Part and Inventory Search

Sponsor

Back
Top