Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
test alarm-origination
- Thread starter bettyr
- Start date
Modular Messaging Help
Print | Back | Fwd | Close
Home | Search | Site Index
Getting Started Administration Maintenance Reference
Home > Maintenance > Resetting alarm origination
Resetting alarm origination
If system attempts to make an alarm call repeatedly fail, the system will stop attempting to report existing alarms, even if additional alarms subsequently occur. The test alarm origination function will also fail if the system is in this state.
Caution!
The problem that prevented the alarm calls from being successfully completed must be resolved. If it is not, then alarm origination will simply stop again after repeated call attempts fail.
To allow the system to begin making calls about alarms again:
Start at the Messaging Administration main menu and select:
Basic System Administration
Alarming Administration
The system displays the Alarm Management page.
Select Inactive from the Alarm Origination drop-down list.
Click Save.
Now select Active from the Alarm Origination drop-down list.
Click Save.
Alarm origination is restored.
Click Return to Main to return to the Messaging Administration main menu.
Top of page
Home | Search | Site Index | Print | Back | Fwd | Close
©2004 Avaya Inc. All rights reserved. Last modified 6 February, 2004
Ken Means
Print | Back | Fwd | Close
Home | Search | Site Index
Getting Started Administration Maintenance Reference
Home > Maintenance > Resetting alarm origination
Resetting alarm origination
If system attempts to make an alarm call repeatedly fail, the system will stop attempting to report existing alarms, even if additional alarms subsequently occur. The test alarm origination function will also fail if the system is in this state.
Caution!
The problem that prevented the alarm calls from being successfully completed must be resolved. If it is not, then alarm origination will simply stop again after repeated call attempts fail.
To allow the system to begin making calls about alarms again:
Start at the Messaging Administration main menu and select:
Basic System Administration
Alarming Administration
The system displays the Alarm Management page.
Select Inactive from the Alarm Origination drop-down list.
Click Save.
Now select Active from the Alarm Origination drop-down list.
Click Save.
Alarm origination is restored.
Click Return to Main to return to the Messaging Administration main menu.
Top of page
Home | Search | Site Index | Print | Back | Fwd | Close
©2004 Avaya Inc. All rights reserved. Last modified 6 February, 2004
Ken Means
- Status
Similar threads
