Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
tes824 press 9?
- Thread starter ingy500
- Start date
See the setting under outgoing line preference
It's under program 2.3 - Under Line preference select preferred outgoing line. Default is No line
It's under program 2.3 - Under Line preference select preferred outgoing line. Default is No line
- Thread starter
- #3
- Thread starter
- #4
Hello everyone. I am working with a KX-TA 824 Hybrid System and am using the KX-TA Maintenance Console to program it. There are 3 CO's, and currently, if no lines are being used, they pick up in the order of 3, 2, 1. I need to change that so it picks up in order 1, 2, 3. I can't seem to find the place in the maintenance console where I can do that. Anyone know where that setting is or know another solution? Thanks for your help!
- Status