Terminal server RJ45 to Amphenol pinout

[Narinekevinpooran]

Hello,

Does anyone know the pinout for an (MRV) RJ45 to amphemol pinout ? or RJ45 to Port 0 pinout ?

what have,
RJ45 > DB9 > mini gender changer DB9 > mini adapter DB9-DB25 > Null modem > Port 0 on (NTAK19ECE6) to amphenol. Connects to CS1000 (CS, SS, MCG)

I want to go from MRV RJ45 to Amplenol directly.

Using a multi meter i tested from the RJ45 end to the amphenol end to identify the used pin. Found only four to provide continuity.

RJ45

​

Amphenol
3 4
6 29
4 25
5 25


doesn't work.

 

[Firebird Scrambler]

I found this below

Media Gateway Utility (MGU) card provides serial cable ports ( MGC serial ports 1, 2 & 3 )
The NTC325AAE6 serial cable kit includes the N0211606 RJ45 to DB25 (male) adapter which is intended to connect the MG1010 to a DCE device such as a modem, and two RJ45 to DB9 (female) N0211605 adapters which have an integrated null modem and are intended to connect the MG1010 to DTE devices such as a terminal or PC serial port.
Pin definitions and connection details

N0211606 Standard
DB25 DB9 serial
RJ45 MGC SDI MGC SDI CP1 & 2 modem port pin Description ( signal direction is
Pin # 1 2 & 3 SD1 & 2 (DCE) DB9 Serial from DTE perspective)
Signal Signal Signal DB25 Pin # DB9 Pin #
1 nc nc DSR 6 6 Data Set Ready (in)
2 DCD nc DCD 8 1 Data Carrier Detect
3 12v nc DTR 20 4 Data Terminal Ready (out)
4 GND GND GND 7 5 Ground
5 RD RD RD 3 2 Received data (in)
6 TD TD TD 2 3 Transmitted Data (out)
7 nc nc CTS 5 8 Clear To Send (in)
8 12v nc RTS 4 7 request to send (out)

I'm not sure if it is the same?.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin