Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Terminal not defined in Software
- Thread starter TNTERS
- Start date
Program a phone on the card and it will bring up the TN's. Just program a test 2616, and then out the phone. It will then list the unused TN's that are on the card. Funky but it works. The PBX will recognize as uneq until something gets programmed on the card.
- Thread starter
- #3
First tanks for the reply.
Oke, but i'm using MAT 6.54 and I also have access to the prompt dirtectly. When I tried to programm a phone on card 17 via MAT I do receive an error SCH3292 Invalid Card density keyword. Whta's the LD command to add a phone from the prompt directly? I aready know some LD command and parameters but maybe I'm missing the importan one.
Oke, but i'm using MAT 6.54 and I also have access to the prompt dirtectly. When I tried to programm a phone on card 17 via MAT I do receive an error SCH3292 Invalid Card density keyword. Whta's the LD command to add a phone from the prompt directly? I aready know some LD command and parameters but maybe I'm missing the importan one.
- Thread starter
- #4
Okidoki- Status
Similar threads
- Locked
- Question
- Locked
- Question