terminal monitor adjustment?

[DV21]

We have a CS1000, stand alone for upgrading phones before distribution. The terminal monitor died, we had some spares but the screen always comes up short and wide, I can't see the prompts off the left side of the screen. The monitor only has brightness\contrast adjustment. How can I adjust the screen so I can read the prompts?

Thank you

 

[trvlr1]

It depends on the type of monitor you have. Typically you press one of the function keys to get in to sub menus to make changes like this. We have a few different kinds that F3 gets us in to it, but I am sure there are many different flavors out there. If you post the monitor make and model, I am sure someone will be able to help.

 

[KCFLHRC]

It would help to know what kind of monitor you have. There should be a set up for the monitor to go in and adjust settings. You basically want to emulate a VT 220 terminal if you have that option.

 

[DV21]

It is a MAX 900 terminal monitor. It's the same model as the one that died.

I tried F3, but I can't see the prompt.

Is is there a setting on the CS1000? All the spare monitors came up this way.

Thanks for the quick response-

 

[KCFLHRC]

There is no setting on the CS1K. You have to match your monitor to the PBX

 

[KCFLHRC]

Go here

http://www.wyse.com/service/support/kbase/KBmenu5.asp?Q=19