Tenant Partitioning 1

[wpetilli]

My core site did not have TP turned on. This was then flagged on in the features of the web interface. When do a disp sys cus I see TP flagge to 'y'. So the feature turn on worked. However, none of the commands are available to administer. I've done a 'test license' and that has not enabled the command sets. How do these come available?

 

[AvayaTier3]

This should be all that is required.
What commands do not work?

display system-parameters customer-options                      Page   5 of  11
                                OPTIONAL FEATURES

                                                         Tenant Partitioning? y

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[wpetilli]

cha tenant ... disp tenant

 

[AvayaTier3]

Did you install a license to enable this feature?


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[AvayaTier3]

Hardware platform? Definity / CM Software version?

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[wpetilli]

No, I am running 6.0.1 and the feature was just enabled via the web SMI. I was under the impression that this doesn't require purchase/license install.

 

[AvayaTier3]

In main CM

display system-parameters customer-options Page 5 of 11

verify Tenant Partitioning? y

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[wpetilli]

Yes, it is flagged to 'y'

 

[AvayaTier3]

Have you logged out and back in after you turned this on?


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[montyzummer]

have you tried a reset sys 4 I have had this once where multi locations did not activate until the core was reset , absolutely should be no need to do it but it certainly worked.

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[wpetilli]

I logged in and out of ASA and they are there now. Thanks!

 

[montyzummer]

star for avayatier3 then I was telling you to do a reset

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[AvayaTier3]

Login and logout is the way to have your current login session know about features
turned on after you logged in. Reset is not required.

You can also type Command: newterm
which emulates a logout and login

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[wpetilli]

No worries.. thanks for the help. This whole thing is because I have an LSP in India, in which there are toll bypass laws there. Meaning, by law you cannot be on an IP call (internal call from US to India office) and then they conference in a local dunkin' donuts. So TP needs to be setup for them.

 

[bleebrant]

Just as an FYI, and you may already be aware of this, but with CM 6.3 there is a Special Application, SA9122-Restrict Public-Private Network Connections.
I've never used it, but was told there's an application note on it:
SA9122: Restrict Public-Private Network Connections (Toll Bypass) - App Notes.
This may work better than using Tenant Partitioning(?)

 

[wpetilli]

Good to know. This site isn't a 6.3, but the next time an upgrade does take place that feature would be available.