Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Teltronics SEB console access

Status
Not open for further replies.

brison

Vendor
Apr 2, 2007
37
US
Trying to get an SEB2 (not NetPath) to talk to me via Procomm+. Used both local and host1 interfaces. All baud rates 8-N-1 with and without modem eliminator. Procomm shows connected but no data whatsoever and no response to CR or any other keys. Tried multiple units with no luck.

Anyone know the trick to do this?

Brison
 
I tried with and without null modem / modem eliminator. I don't know how to tell if ports are disabled. My aim is to assess the health of the units and confirm memory, port count, etc.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top