Telnet to outside of PIX with VPN 4.0.x

[sunyasee]

Hi,

I have a question, I used to use VPN client 3.6.3 to connect and then telnet to the outside interface of a PIX. But I have recently downloaded a newer version of client and am now unable to telnet to the outside interface once I have a VPN connection. Does anyone else have this problem? Is there something different I have to do with the configuration of the PIX now that I am using the newer version of client?

Thanks


----

Sunyasee

 

[themut]

You shouldn´t modify the configuration. Can you test with a 3.6.X vpn client on another machine and see if it works? I would advise you to make sure your configuration is still working with the version you had before. If it is still working then I could be a bug in the new code.

 

[sunyasee]

Hi,

I tried it on a different machnine with 3.6.x, I made a connection with the client and was able to successfully telnet to the outside of the PIX. When I tried to use version 4.0.1 and 4.0.3 I made a VPN connection but was unable to telnet to the outside address of the PIX. I manage several PIX remotely I have been unable to telnet to any of them using 4.0.x, they each have different versions of PIX OS.

I have the line of config
telnet 192.168.1.0 255.255.255.0 outside

192.168.1.0 is the client pool network.



----

Sunyasee

 

[themut]

Well... if you are able to telnet to the outside interface with 3.6.X but not with 4.X, then I would say it´s a bug on the new release. Can you open a case with TAC?