Telnet question.

[monman]

Hi,

I've configured a tty port for modem dial-in access to mirror that which I have on another system which is allowing telnet dial-in.

The modem receives the call and after hand-shaking disconnects. My question is .. is there somewhere on AIX where I might have telnet disabled or any other setting I might check.

Thanks

Mon

 

[MoshiachNow]

Hi,

Does the modem disconnect before you login or after ?
From the story it sounds like a problem with a modem/phone line rather then an AIX issue.
I would check those first thing. "Long live king Moshiach !"
h

http://www.noahide.com/movement.htm

 

[monman]

the line seems to be fine. When dialing from ordinary phone you get the signal noises. The same is true when we connect via modem. We briefly get a connected and then befoer any login information it disconnects ??

 

[MoshiachNow]

It's the modem problem then - try a different one. "Long live king Moshiach !"
h

http://www.noahide.com/movement.htm

 

[DSMARWAY]

hi,

what speed is your ports settings ?
try lowering the speed ( have a look in /etc/uucp/Devices file)

Can you connect to the modem on this server without a problem, i.e. if you have the port in shared mode you should be-able to cu to the port otherwise disable the port
and cu to it .

 

[JSiva]

Hi
How are you doing this ?

#cu -ml tty0 (and have you enabled this tty in Devices file with appropriate speed, I recommend 19200?)
type
ATS0=1

then try dial in from a modem, even if it is not connecting you need to put some more AT commands like X1 (or may be x0)and try...let me know what happens

JSiva

Om Maha Ganapathiye Namaga!