Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Telnet port to the 8700
- Thread starter travlries
- Start date
- Thread starter
- #3
If you are talking about CM 4.0 or CM 4.0.1, you need to go into the "Launch Maintenance Web Interface", click on "Server Access", then click on "enable" for the Telnet Server (23), and "enable" fot the SAT (Telnet 5023), then click on "submit".
By default, telnet is turned OFF on CM 4.0
I Always, Always always re-enable it. SSH is just too slow, and does not work all that well with some applications.
Hope this fixes your problem,
Mitch
By default, telnet is turned OFF on CM 4.0
I Always, Always always re-enable it. SSH is just too slow, and does not work all that well with some applications.
Hope this fixes your problem,
Mitch
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question