Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Telnet Log in problem - urgent

Status
Not open for further replies.

Monrovia

Technical User
Mar 1, 2007
292
IN
Hi all

I have recently changed the IP address of my pbx MD110.

[TT]
CADAP;
CALENDAR DATA
IDENTITY=MD110
VERSION=CXP1010101/2/BC12SP7/R4A
13:08:35
WED 22 OCT 2008[/TT]

But after that i could not log in to the system. what could be the possible reason?

[tt]
<IOUAP;
ACCOUNT DATA
NAME AUTH DATE DESC TYPE LOGIN-PORT
NAJJAR 4 - - - -
GIRMA 4 - - - -
AZAD 4 - - - -
HAZEM 4 - - - -
YOUSIF 4 - - - -
RSAWAQED 4 - - - -
DELVY 7 - - - *SYSTERMINAL
END

<IONPP;
NETWORK PORT CONFIGURATION DATA
EQU IP GATE MASK ETHERNET
001-0-60-4 10.158.6.50 10.158.6.1 255.255.255.192 00.80.37.8E.29.D6 [/tt]

before the it was
[tt]
<IONPP;
NETWORK PORT CONFIGURATION DATA
EQU IP GATE MASK ETHERNET
001-0-60-4 10.158.6.50 10.158.6.1 255.255.255.192 00.80.37.8E.29.D6
END


<IODDP;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 MASTER FUJITSU IN SERVICE
SYSSUBFS11
SYSSUBFS21
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN CIL-2 001-0-60-2 - OUT IN SERVICE
SYSN CIL 001-0-60-3 - OUT IN SERVICE
SYSN TELNET1 001-0-60-4 - NETWORK/MML - 0 7
SYSN TELNET2 001-0-60-4 - NETWORK/MML - 7
SYSN TELNET3 001-0-60-4 - NETWORK/MML - 7
SYSN TELNET4 001-0-60-4 - NETWORK/MML - 7
SYSN TELNET5 001-0-60-4 - NETWORK/MML - 7
NODE2 - 001-1-60 - - IN SERVICE
NODE2 ONEBOX 001-1-60-2 - OUT IN SERVICE
END [/tt]

an urgent help needed

thanks to all
 
The problem solved.

it was my NIU created the prob. restarted the board. now working fine with new ip
 
Hi!
After changing the IP address on any NIU, NIU2, ELU32 or IPLU, you should restart the board by: RFBOI:BPOS=x-x-xx;
The IP address "10.158.6.50" you have posted is the same "before" and "after"...
You can use the serial cable to log on to the MD110 and restart the NIU. Use NIU port 1 to connect your serial cable.
If you had one TELNET user on the second NIU board (NODE2), you could have done this form TELNET...

///doktor
 
oops my mistake. the ip was before

ip = 10.172.179.30
gate = 10.172.179.20
mask = 255.255.254.0

thanks doktor for your informations.

yes i did that, using a serial cable - direct connection, i restarted the board. the second niu we dont use for MML.

 
Monrovia! Thank you very much for your status update. All persons creating new posts in this forum should give a status on if the issue(s) was (were) solved or not...

///doktor
 
change ip add on your comp. you have to be in same network
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top