Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
telnet and hyperterminal
- Thread starter qweas
- Start date
![[2thumbsup]](/data/assets/smilies/2thumbsup.gif "[2thumbsup] [2thumbsup]")
MaxPipeline
Vendor
telnet and hyperterminal are used for remote management of devices such as routers, switches, etc. It uses a protocol called VT-100 emulation.
Telnet:
A character oriented terminal, running a VTXXX (100, 200,,,) emulation, using TCP(/IP) for comunication. Mostly used as consol interface for Unix and Gnu/Linux machinery.
Hyperterminal:
basically the same thing, but using a serial line to do the communication (COM-port). A good old fasioned asynchronious terminal.
A character oriented terminal, running a VTXXX (100, 200,,,) emulation, using TCP(/IP) for comunication. Mostly used as consol interface for Unix and Gnu/Linux machinery.
Hyperterminal:
basically the same thing, but using a serial line to do the communication (COM-port). A good old fasioned asynchronious terminal.
- Status
Similar threads
- Locked
- Question
- Locked
- Question