Teleworker System - Internet Visible IP Address

[gotrojans]

On the Teleworker system, where is the Internet Visible IP Address configured?

Thanks

Ron

 

[wireman50]

In the setup of the MSL via the console. Its actually part of the MSL not the teleworker blade. Assuming you are working in in server/gateway mode. I never found any other way of changing it. If its in server only mode then its changed in your firewall as you will only have a local address on the MBG.

 

[bribob]

Or in MBG > Configuration > Network Profiles > Custom

ICP-Side = internal IP
SET-Side = public IP

This will also affect some of the IP addresses in SIP [trunking] headers.


-b