We have had success with the teleworker and softphones when the Teleworker Server is a spearate server. However we have encountered an issue with the Teleworker solution when it's on a hard disk inside the 3300.
We can see the Teleworker from the ouside world using the network analyzer, we can telnet and manage the Teleworker from the lan, but when we try the ICP test from the teleowrker is fails trying to contact it on port 6800.
The ICP is a 3300 CX, so both the LAN and WAN port are cnnected to the same switch (as per the engineering guidlines) This is linked to a Cisco PIX with a LAN,WAN and DMZ port. The DMZ port is also on the LAN switch. Should the WAN and DMZ port be linked directly?
We can see the Teleworker from the ouside world using the network analyzer, we can telnet and manage the Teleworker from the lan, but when we try the ICP test from the teleowrker is fails trying to contact it on port 6800.
The ICP is a 3300 CX, so both the LAN and WAN port are cnnected to the same switch (as per the engineering guidlines) This is linked to a Cisco PIX with a LAN,WAN and DMZ port. The DMZ port is also on the LAN switch. Should the WAN and DMZ port be linked directly?