steveycarr
Technical User
Hi Guys,
Mitel 3300 ICP Rls 9
APC with MSL 8.5 (latest from Mitel Website for APC)
Teleworker 4.5
Is there a idiots guide to configuring an APC with MSL in preparation for installing Teleworker. I'm not so bothered about the Telworker bit, I just cant figure out how to set up the APC, for example what needs to be done on the 3300, i.e. setting up the WAN Port as an APC? What IP Addresses are reqd. How many, What connects to what? WAN to 1GB Port? How should the APC be configured, server only, server-gateway?
Does the APC need to be in a different Subnet from the Controller, what needs to be done if using a BT Busines (2 Wire) Hub.
Any guidance would be much appreciated.
Steve
!ExtraDunce
Mitel 3300 ICP Rls 9
APC with MSL 8.5 (latest from Mitel Website for APC)
Teleworker 4.5
Is there a idiots guide to configuring an APC with MSL in preparation for installing Teleworker. I'm not so bothered about the Telworker bit, I just cant figure out how to set up the APC, for example what needs to be done on the 3300, i.e. setting up the WAN Port as an APC? What IP Addresses are reqd. How many, What connects to what? WAN to 1GB Port? How should the APC be configured, server only, server-gateway?
Does the APC need to be in a different Subnet from the Controller, what needs to be done if using a BT Busines (2 Wire) Hub.
Any guidance would be much appreciated.
Steve
!ExtraDunce