TELEPHONY MANAGER 2245 AND BCM 3.7

[leprechaun3]

Ihave a BCM 3.7 c/w Telephony Manager 2245 and 2210 handsets
The switch is a Cisco 48 port POE SWITCH
There are some IP sets connected (mixture of i2004 and i2007)
There are also some T-series Digital Sets
All is well except I cannot get the 2210 handsets to register with the BCM
tHERE IS ALSO AN ACCESS POINT
T2210 sets are wireless

 

[biv343]

What firmware is on the 2210 sets? are you using DHCP or static addresses? Do the phones come up with any type of message such as "no unistim DHCP" or just sit at the "checking code" prompt?

 

[gwebster]

For BCM 3.7, latest firmware for the 2210 is 97.067 and for the 2245 is 174.027.