Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
telecom billing system on OTM 2.01
- Thread starter cemil
- Start date
Any luck yet?
Try These guys have the the best at this application and are the most reasonable too.
Try These guys have the the best at this application and are the most reasonable too.
Cemil,
Have you built the telephone configuration? You will have to build that first in order to cost the calls. Get an List trunk member (LTM) report from your switch. All your trunks will have to be added to the config. Next you can use a fixed cost in the beginning for costing i.e. $0.05/min.
Have you built the telephone configuration? You will have to build that first in order to cost the calls. Get an List trunk member (LTM) report from your switch. All your trunks will have to be added to the config. Next you can use a fixed cost in the beginning for costing i.e. $0.05/min.
- Status
Similar threads
