Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tektronix Phaser 360 side panels 1

Status
Not open for further replies.

amakosin

Technical User
May 4, 2005
2
CA
I have just got hold of a Phaser 360 Printer. Can anyone help me to figure out how to get the plastic side panels off? There's something fishy with the printer. It displays error 08,001.44:2523, and I can't get the maintanance tray out at all. Seems its stuck.

Thanks in advance,

Art
 
Open the ink loader cover and remove teh 4 screws then remove the inloader cover. Open the front cover and remove the 2 screws on the upper inside holding the side covers on, the right side may have a screw under where the ink loader cover overlaps the side, with those screws out the side cover should just flop off. On right side rotate the clutch near the top so it moves the cap assy all the way down, this should unlock the maintenace drawer and allow it to slide out.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top