tech quest on VO sound quality

[PantherRun]

Hey;
In each of my MCs i have a layer with a vo-voice over - on it. In soundforge the vo is nice and clear, but once published in flash it has a tinny, wobbley sound to it. Is there something i should be doing to the vo to maintain quality as the movie is published?
Thanks
Hoss

 

[oldnewbie]

Is this a MP3?

Are you changing the compression or using the imported compression.

Right-click one of your sounds in the Library, and select properties. Is the compression set at "default"?

 

[PantherRun]

Yes and no. Some are in wav, some in mp3. i must say that the ones that made me notice the tinny sound seemed to be in wav at the moment. Now on publishing, i believe wav files are changed into mp3s but would it be better to convert them to mp3 before i publish?

on compression - I right clicked and found it to be set to "default" on wav and set to 'mp3' on mp3 files. I have not changed compression so i am assuming i'm using the compression settings the vo files came in on.

Also i saw a "speech" setting. Should i be using that setting since the vo, while it has sound effects like a storm, also contains a lot of speaking?

You know, oldnewbie - i was so damn close to having all the issues resolved in this movie! Now this and the geturl thing!
Anyway as always thanks

Hoss

 

[oldnewbie]

What about Publish Settings? Would you possibly be overriding the compression there?
Can you post a link to a mockup .fla (zipped up and in MX only format), holding one of your .wav & mp3?