Teams & overhead paging

[macphoneguy]

i dont know if this is the right place but does anyone have a example of teams/powershell for accessing a overhead paging module as the algo 8301 as the algo documention is very Vague

we are using teams with a audiocodes sbc, if there is somewhere that does show the steps let me know where

thanks in advance

 

[biv343]

Assuming the Algo registers to the AudioCodes SBC as a registered user (needs a FEU/registration license), then its just a matter of configuring the dial plan in Teams to route the call to the SBC via the direct routing trunk. Make sure you have IP to IP routing rules configured to send the digits destined for the paging to the IP group associated with the registered users.