tde600

[pbxinstaller]

Hello
I have 2 pbx Tde 600
The first contains:1* ELCOT16 + 8 * ECSLC24 +1*DLC16
The second contains : 7 * ECSLC24
I want to link between the pbx's and that the distance between them About 1000 meters
How is this possible and what I need to connect a cable between them
Do I need extra cards in both pbx's
Do I need special Software
Please, I want a detailed explanation of how connecting and benefits of
Thank you

 

[obtsystems]

You will need a dsp card and use an ip gateway to connect both system

 

[cwc3]

Do you have a common network between both loacations?Do you have 2 extra fiber strands between the 2 locations?

http://www.thetelephonemanonline.com

 

[pbxinstaller]

thanks for all
yes I have 2 extra fiber strands between the 2 locations
Do you mean Dsp is KX-TDE0111
And if installed the Dsp how calls can be conducted between the two locations at the same time
thanks for obtsystems&cwc3 and I appreciate your efforts

 

[cwc3]

Yes I am working on a identical project this week but have three buildings 1000 meters apart on same site bought the DSP for each TDE and media adapters and fiber patch cable and off the shelf higher end Net gear worked like a charm......!

http://www.thetelephonemanonline.com

 

[cwc3]

I chose setting up my own Lan rather than
plug into the existing network that
does not appeal to me but it can be done!!!

http://www.thetelephonemanonline.com

 

[pbxinstaller]

thanks cwc3
I understand now the general plan for the implementation of the project and request I will buy 2 Dsp Card
I hope to help me in the future for the programming system
I repeat my thanks and appreciation for your great

 

[cwc3]

I am assuming you are not in the states?

http://www.thetelephonemanonline.com

 

[pbxinstaller]

You are on the right
I am a Palestinian living in Damascus

 

[cwc3]

cool!

http://www.thetelephonemanonline.com